LibrePilot Forum
Development => GCS General => Topic started by: shuma13 on September 06, 2017, 06:27:41 pm
-
Hello,
New Eachine 250, not able to connect. I have read through all I can find, and here is where I am at
- When I plug it in USB, windows tries to install CP2102 USB UART
- I read that it should come up as USB HID device (CopterControl)
Anything else I can try? Tried 3 different computers and USB cables.
-
Hi, welcome.
If windows detect a CP2102 device your board is certainly a F3 board - Naze32 like.
Try Betaflight or cleanFlight.