LibrePilot Forum
Development => GCS General => Topic started by: Sirsamuel13 on May 21, 2016, 10:58:58 pm
-
Im using librepilot 15.09, and when the drone arms the motors wont move, when i move the sticks. Ive tried resetting the board, ugrading, ugrading and erasing and importing new UAV settings. The motors do spin when i go through the vehicle settup wizard, so its not a hardware.
-
What esc do you use ?
The min value should be 1000 for all motors in Output tab.
-
15 amp esc. 3s batteries, and 2204-2300kv motors
-
Did you find a solution for this? I'm running into the same problem.