LibrePilot Forum

General Category => General Discussion => Topic started by: tmohr on November 07, 2017, 10:31:06 pm

Title: GPS loses config / goes back to defaults
Post by: tmohr on November 07, 2017, 10:31:06 pm

Hello,

I have an OPGPS at Flexiport on my Revo.

I configured the GPS to UBX / 19200 several times, it sets itself back to default settings with NMEA / 9600.
Not sure if I can preventthis somehow?


Thanks for any hints,
Torsten

Title: Re: GPS loses config / goes back to defaults
Post by: f5soh on November 07, 2017, 11:18:23 pm

This cheap GPS (neo7 something series) has minimal hardware, without eeprom for config storage.
Every time you remove power the config is lost.

Using a Revo the GPS is configured every time you apply power (https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/12058679/GPS+setup#GPSsetup-ConfigureGPS), there no need to configure the GPS manually or store settings into the GPS.