LibrePilot Forum
General Category => General Discussion => Topic started by: funtimegrandpa on June 03, 2016, 02:51:14 pm
-
Hello, I am using the Eachine 250 modified with Little Bee ESC's and a Revolution. Things are working well but I wanted to know if there is a way to make tighter Rolls? I dont understand some of the settings and figured I should ask before tinkering. Any help would be very much appreciated.
Thanks again, Grandpa jake
-
Higher rate mode response and max rate limit. The higher the degree per second rotation the faster it flips or rolls. I'm flying with about 550*/second. Which seems plenty fast for now. I started with around 450-480 and it's fast but not fast enough. The mid 500 range seems about perfect
-
This is what I have, what should I change
-
The rate slider. The middle one at the top. Change it from 450 to say 500. Then try 550 if that's not fast enough.
-
Thanks I will give that a try
-
This is what I have, what should I change
Wow !
Flying in rate mode at 450* sec with no expo , and it's too slow to roll ?
Or , are you flying in attitude mode grandpa jake ?
Regards
Grandpa Ern.
-
Like NicolasDavid says in first post, be sure the rate value you set is not limited by the Max Rate Limit value.
https://librepilot.atlassian.net/wiki/display/LPDOC/Rate+Setup#RateSetup-Advancedtab
-
My current rates on my 3s "X" copter are 550 pitch and roll rate and 600 max rate limit. 70 expo on roll and pitch 20 on yaw at 400*