LibrePilot Forum

General Category => General Discussion => Topic started by: Raehm on January 21, 2017, 08:04:12 pm

Title: tx setup
Post by: Raehm on January 21, 2017, 08:04:12 pm

I crashed my Spedix 250 about a year ago and am just now building a new one.

Doing the TX setup, I find that the motors only start responding when the throttle is about 1/3 engaged.

How do I adjust this?

Thanks!

Title: Re: tx setup
Post by: f5soh on January 21, 2017, 08:21:11 pm

Did you calibrate the Esc and set the neutral in output tab ?
https://librepilot.atlassian.net/wiki/display/LPDOC/ESC+Calibration