LibrePilot Forum

General Category => General Discussion => Topic started by: soulreaper on April 03, 2016, 01:17:27 am

Title: attitude adjustment
Post by: soulreaper on April 03, 2016, 01:17:27 am

Hi guys.   I have a cc3d.  In the attitude menu,  you can trim the quadcopter if it has a minor drift after you have leveled the gyros.   In my case the pitch has a drift forward on 0 setting.  If i change it to -1 it has a slight drift backwards.   Standard adjustments are done in increments of 1.  Where 1 is too much,  can i manually input -.5 instead of one.   I only need .5 not 1?

Title: Re: attitude adjustment
Post by: f5soh on April 03, 2016, 12:29:23 pm

Go to uavoBrowser > AttitudeSettings and set values like you want.