LibrePilot Forum
Development => GCS General => Topic started by: DanNT on July 28, 2015, 04:47:21 pm
-
Just finished building GCS in Linux, will have another go in windows tomorrow night and might try setting up one of my Revo's!
-
Clever bugger...
We need to talk.
-
Same here on ubuntu 15.04 (thanks to Alessio).
Im flying with motor constraints on Atom :)
Rate trainer too, just to try.
-
Did you have any issues with slow downloads from the official QT mirror?
I've had the same problem on my Linux install and also now my Win10 install - downloads at less than 5k/s. Updated make/tools.mk to point to a Japanese mirror and i'm not getting greater than 250k/s (not great, but much better!). On that building in Windows 10 right now.
-
No problems on ArchLinux too..
Works flawlessly.. ;)
-
Linux Mint 17, No problem building, but could not make package.
Any help will be appreciated
-
I'm not able to make package on Ubuntu either. I think it may be all the changes still being made for osgearth haven't made it to the package recipe yet. I just run it in place without packaging or installing. ./build/librepilot-gcs_release/bin/librepilot-gcs is all it takes if you're in the directory with the main makefile.
-
I using the same command to run.
Inno89,
Did you build the Arch package?
I will try tonight in Arch my main PC and see. If that work I will go back to Arch in my laptop.
-
I did
git pull
make all_clean
make opfw_resource
all good
then
make gcs, and I get:
make gcs
WARNING tools/osg-3.5.1-linux-x64-qt-5.6.0 not found (make osg_install), using system PATH
WARNING tools/osgearth-2.7-linux-x64-qt-5.6.0 not found (make osgearth_install), using system PATH
Info: creating cache file /home/armando/code/librepilot/build/librepilot-gcs_release/.qmake.cache
Reading /home/armando/code/librepilot/ground/gcs/src/src.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src]
Reading /home/armando/code/librepilot/ground/gcs/src/libs/libs.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src/libs]
Reading /home/armando/code/librepilot/ground/gcs/src/libs/version_info/version_info.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src/libs/version_info]
Project MESSAGE: Using python interpreter: "python"
Reading /home/armando/code/librepilot/ground/gcs/src/libs/qscispinbox/qscispinbox.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src/libs/qscispinbox]
Reading /home/armando/code/librepilot/ground/gcs/src/libs/qtconcurrent/qtconcurrent.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src/libs/qtconcurrent]
Reading /home/armando/code/librepilot/ground/gcs/src/libs/aggregation/aggregation.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src/libs/aggregation]
Reading /home/armando/code/librepilot/ground/gcs/src/libs/extensionsystem/extensionsystem.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src/libs/extensionsystem]
Reading /home/armando/code/librepilot/ground/gcs/src/libs/utils/utils.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src/libs/utils]
Project ERROR: Unknown module(s) in QT: quickwidgets quick qml svg
make: *** [/home/armando/code/librepilot/build/librepilot-gcs_release/Makefile] Error 3
Please help
OS Linux Mint 17.
-
...
WARNING tools/osg-3.5.1-linux-x64-qt-5.6.0 not found (make osg_install), using system PATH
WARNING tools/osgearth-2.7-linux-x64-qt-5.6.0 not found (make osgearth_install), using system PATH
'''
do what it says:
make osg_install
make osgearth_install
That should get you past that error, I don't know if it will compile all the way or not. My first compile after today's changes is still running.
-
Ok I have to wait installing qt 5.6 and it will take some time
-
It compiles on my linux system but running it gives an error. It runs but there's an error in the PFD so it doesn't display. It'll probably get worked out tomorrow.
Hank
-
No. still error:
make gcs
Info: creating cache file /home/armando/code/librepilot/build/librepilot-gcs_release/.qmake.cache
Reading /home/armando/code/librepilot/ground/gcs/src/src.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src]
Reading /home/armando/code/librepilot/ground/gcs/src/libs/libs.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src/libs]
Reading /home/armando/code/librepilot/ground/gcs/src/libs/version_info/version_info.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src/libs/version_info]
Project MESSAGE: Using python interpreter: "python"
Reading /home/armando/code/librepilot/ground/gcs/src/libs/qscispinbox/qscispinbox.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src/libs/qscispinbox]
Reading /home/armando/code/librepilot/ground/gcs/src/libs/qtconcurrent/qtconcurrent.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src/libs/qtconcurrent]
Reading /home/armando/code/librepilot/ground/gcs/src/libs/aggregation/aggregation.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src/libs/aggregation]
Reading /home/armando/code/librepilot/ground/gcs/src/libs/extensionsystem/extensionsystem.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src/libs/extensionsystem]
Reading /home/armando/code/librepilot/ground/gcs/src/libs/utils/utils.pro [/home/armando/code/librepilot/build/librepilot-gcs_release/src/libs/utils]
Project ERROR: Unknown module(s) in QT: quickwidgets quick qml svg
make: *** [/home/armando/code/librepilot/build/librepilot-gcs_release/Makefile] Error 3
-
Hi, I am using Ubuntu 14.04. I did a fresh install this week. The following worked for me.
make all_sdk_install
make osg_install
make osgearth_install
make opfw_resource
make gcs
But "make package" doesn't work? Anyone have a fix?
-
I don't have a fix for you but you can run it in place, just execute build/librepilot-gcs_release/bin/librepilot-gcs I never install, I just run it where it is.
Hank
-
I was able to build no errors, but I get this error when I run GCS:
I installed the GLibcc
-
Got all working again. It was an issue with one of the libraries.
Thanks all for your help.
-
Can you post what you did to correct the problem in case others run into the same problem.
-
I re-installed libc6-i386, Make all_clean, and start compiling again.