LibrePilot Forum
Development => GCS General => Topic started by: Jhinta on March 30, 2016, 05:44:31 pm
-
:o whats up with that ?
no tel com error on osd unless i have oplink connected to pc.
also i cant start like this, v/a/gps all zero. anyone?
ahh so having quad as cordinator makes it work , but sloudnt it be the other way around ? oplink as cordinator en quad as slave?.
if i do that i cant start because of no tel com :-\
-
If you connect Revo to Pc, the telemetry stream go to Pc, not OSD.
Not tel com means no data received from board.
-
If you connect Revo to Pc, the telemetry stream go to Pc, not OSD.
Not tel com means no data received from board.
i get that , but , osd is just showing me whats wrong, if i dont have oplink nor usb active on pc and power the quad -> it will not start only when i open gsc and have opling to pc -> but changing oplink from revo to cordinator make it work ( but the pc should be the cordinator) so why does it disable all thing if no oplink (cordinator)connection is found when i have a osd
in short my quad will not start if no link is found that acts as cordinator , but when quad is cordinator it works .
IF i have a oplink active ,, all is oke no problems at all
quad setup , ioflex=ppm+out flex=tele main=gps and other current usb=tele+??something