LibrePilot Forum
General Category => General Discussion => Topic started by: irish1234 on January 13, 2018, 07:21:16 pm
-
Hello all,
pretty new to this quadcopter hobby. I'm having an issue with connecting the CC3D to LibrePilot. The Tx/Rx bars do not light up when the CC3D is attached to the computer but the CC3D is flashing. It seems like there is no connection. I've tried about 4 mini-usb wires to solve the problem so I don't believe it is because they are a "charging" only wire. Any troubleshooting help would be appreciated. Thanks.
-
Hi,
Try a Manual update:
- Disconnect board
- Firmware tab, click "Upgrade&Erase"
- Connect board
Maybe post a picture with your board.
-
Looks like that did the trick! thanks for the assist
-
Great :)